Wood Sheets : Plywood, Veneer and MDF 1.5 – 12mm. Perfect for all Laser processes.

Birch plywood is most commonly used with Laser work and is available in 1.5mm, 3mm, 6mm, 9mm and 12mm thicknesses. It is the perfect material for Laser work due to its strength which means it can be intricately cut. Colour variations may occur between separate individual sheets and the finish is grained.

MDF is also commonly used in Laser work for the same reasons as Plywood. Although as it is manufactured and not a natural product it is more consistent in appearance.

Veneer sheets are generally made from an MDF sheets with a layer of natural wood veneer on either side. Due to this there can be differences in colour and grain from sheet to sheet.

As a material it is suitable for many types of project including Retail Displays, Model Making, Signage, Decorations, Crafting and Light construction.

Laser Cutting :- Wood is the perfect material for Laser Cutting due to its strength which means it can be intricately cut. Some light scorch marks may occur on the surface but this can be reduced if required with the addition of a protective covering. The cut edge is left blackened.

Raster Engraving :-  A Clear and detailed finish is obtainable with most types of wood. Some colour change may occur, as the material is burnt away. Variations in depths can also easily produced. Though this may lead to more colouring of the surface.

Vector Engrave / Cutting :- As with Raster, a high level of detail and finish are obtainable. The colour of the finish can be lighter or darker dependant on the wood used and the directives given.